Samsung Galaxy Amp 2 SM-J120AZ (Original Firmware) Official Flash File Download & See Instructions How to Flash Stock Rom in your Samsung Galaxy Amp 2 SM-J120AZ.
How to Flash Samsung Galaxy Amp 2 SM-J120AZ Stock Rom Using Odin
1: Download and Install Samsung USB Drivers on your pc. In case you have previously installed the Samsung USB Drivers on your pc then Skip this task.
2: Download Stock Rom and extract it on your PC. After extracting you’ll be able to see these types of files:
3: Now Turn Off your Samsung Galaxy Amp 2 SM-J120AZ
4: Now, you need to boot into Download mode. To boot into Download Mode: Press and Hold Volume Down Key, Home Key and Power Key. At the point when Cellphone vibrates Leave the Power Key however Keep holding the Volume Down Key and Home key. You will boot into the Download Mode
5: In the Download mode you will have the capacity to see a Warning Yellow Triangle Sign. In this circumstance you need to press the Volume up key to proceed
6: Download Odin on your PC an extract it . after extricating you will have the capacity to see the accompanying records:
7: Open Odin and connect your phone to the PC.
8: Once you have associated the Samsung to the PC, Odin will naturally perceive the gadget and show “Added” message at the bring down left board.
9: Once your Mobile identified by Odin, tap on the “PDA” catch and select the tar.md5 file that you have extricated in Step #2.
10: : Now, click on the “Start” button in Odin to begin the Flashing process.
11: Once you see, the Green Pass Message then evacuate the USB Cable from the Mobile Phone (During this procedure, your Phone will restart Automatically).
12: Your Samsung Device will now stuck at (boot circle). Now, You need to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP key, Home Key, Power Key. When your device vibrates leave the power key yet keep holding the Volume UP key and Home key. You will boot into the Recovery Mode.
13: In Recovery Mode, Wipe Data/factory reset.
14: After Cache Data is cleared, Press Restart Phone Now from the recovery menu.
15: Now, your Samsung Galaxy Amp 2 SM-J120AZ will restart with the Firmware you have downloaded.
Samsung Galaxy Amp 2 SM-J120AZ (Original Firmware)
Android Version: 6.0
Product Code: USA
File Size: 973MB